GREEN-Flash™-Gel Nail Polish
GREEN-Flash™-Gel Nail Polish
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/ipdi/ ppg-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-hema poly (1,4-butanediol)-9/ipdi copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, silica, diacetone alcohol, CI 77891 (titanium dioxide), BHT, phosphoric acid, mica, CI77491 (iron oxides), CI19140 (yellow 5 lake), CI77499 (iron oxides), tin oxide
61,4% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: transparent
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/ipdi/ ppg-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-hema poly (1,4-butanediol)-9/ipdi copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, silica, diacetone alcohol, CI 77891 (titanium dioxide), BHT, phosphoric acid, CI 77742 (manganese violet), CI 73360 (red 30), CI 19140 (yellow 5 lake)
61,5% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: transparent
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, CI 77891 (titanium dioxide), stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, silica, diacetone alcohol, BHT, phosphoric acid, CI 60725 (violet 2), CI 19140 (yellow 5 lake)
57% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, CI 73360 (red 30), ethyl trimethylbenzoyl phenylphosphinate, silica, diacetone alcohol, CI 15850 (red 7 lake), CI 77891 (titanium dioxide), BHT, CI 77491 (iron oxides), phosphoric acid, CI 19140 (yellow 5 lake)
57,5% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, phosphoric acid, diacetone alcohol, BHT, silica, CI 12085 (red 36), CI 15850 (red 7 lake), CI 73360 (red 30), CI 19140 (yellow 5 lake)
56,5% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, phosphoric acid, diacetone alcohol, mica, BHT, silica, CI 12085 (red 36), CI 73360 (red 30), CI 77891 (titanium dioxide), CI 19140 (yellow 5 lake)
58,5% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, nitrocellulose, butyl acetate, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, ethyl trimethylbenzoyl phenylphosphinate, CI 15880 (red 34 lake), stearalkonium bentonite, CI 15850 (red 7 lake), diacetone alcohol, silica, BHT, phosphoric acid, CI 19140 (yellow 5 lake) , CI 77510 (ferric ammonium ferrocyanide)
49,5% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, phosphoric acid, diacetone alcohol, BHT, silica, CI 15850 (red 7 lake), CI 77510 (ferric ammonium ferrocyanide), CI 15880 (red 34 lake), CI 19140 (yellow 5 lake)
55% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, CI 77891 (titanium dioxide), CI 77491 (iron oxides), diacetone alcohol, silica, CI 73360 (red 30), BHT, CI 15850 (red 7 lake), phosphoric acid, CI 77499 (iron oxides), CI 19140 (yellow 5 lake)
60% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, CI 77891 (titanium dioxide), stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, silica, diacetone alcohol, BHT, CI 15850 (red 7 lake), CI 77510 (ferric ammonium ferrocyanide), phosphoric acid, CI 19140 (yellow 5 lake), CI 73360 (red 30)
57,5% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/ipdi/ppg-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-hema poly(1,4-butanediol)-9/ipdi copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, ci 77510 (ferric ammonium ferrocyanide), ci 77891 (titanium dioxide), silica, diacetone alcohol, ci 15880 (red 34 lake), bht, phosphoric acid, ci 19140 (yellow 5 lake), ci 73360 (red 30)
59% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/ipdi/PPG-15 glybutyl acetate, ethyl acetate, nitrocellulose, hydroxyethyl acrylate/ipdi/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-hema poly(1,4-butanediol)-9/ipdi copolymer, stearalkonium bentonite, ethyl trimethylbenzoyl phenylphosphinate, CI 77499 (iron oxides), CI 77891 (titanium dioxide), diacetone alcohol, silica, CI 77510 (ferric ammonium ferrocyanide), BTH, CI 15880 (red 34 lake), phosphoric acid, CI 19140 (yellow 5 lake)
57,5% biologischen Ursprung
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend
Ingredients
Ingredients
ethyl acetate, butyl acetate, nitrocellulose, hydroxyethyl acrylate/IPDI/PPG-15 glyceryl ether copolymer, acetyl tributyl citrate, isopropyl alcohol, bis-HEMA poly(1,4-butanediol)-9/IPDI copolymer, stearalkonium bentonite, CI 77499 (iron oxides), ethyl trimethylbenzoyl phenylphosphinate, CI 77891 (titanium dioxide), silica, diacetone alcohol, CI 19140 (yellow 5 lake), BHT, CI 77491 (iron oxides), phosphoric acid
57,5% biologischen Ursprungs
Facts
Facts
Green Flash™ is HEMA free and made from safe alternative ingredients.HEMA is a methacrylate monomer and is considered the number one allergen in nail products. This type of molecule gives gel nail polishes their hard, shiny finish, but they are actually very harmful! HEMA and other methacrylates are so dangerous that they have been banned in the EU for non-professionals. They are so small that they can penetrate the skin and cause irritation and even lifelong allergies.
- Removes in just one minute without acetone
- Vegan and with up to 84% bio-based ingredients
- Dries instantly under an LED lamp
- Lasts up to 10 days
Translated with DeepL.com (free version)
Application
Application
The Green Flash™ LED nail polish is suitable for users of all experience levels, especially beginners!
If you know how to apply classic nail polish, you can also apply Green Flash™: first the base coat, the colour and then the top coat. The only difference is that you then let it dry under the lamp!
If you already have experience in applying other gel nail polishes, there is some information to bear in mind: Applying Green Flash™ is more like applying a conventional nail polish. You do not need to degrease the material and, unlike gel, the polish cannot be customised. It is therefore important to master the right techniques right from the start and please note that Green Flash™ is not compatible with products from other brands. Each formula is unique and the compositions vary. Therefore, Green Flash™ products should always be used exclusively with other Green Flash™ products to ensure optimal results. You need at least:
- A base coat from Green Flash™
- A colour lacquer from Green Flash™
- A top coat from Green Flash™
- An LED lamp with an output of at least 24 watts
For controlled removal, we strongly recommend using the bio-based Green Flash™ nail polish remover and the corresponding clips.
Rating
Rating
- Deckkraft: deckend
- Finish: nicht irisierend